ZIPSTOR - Quick Start Guide
|
User Information •The ZIPSTOR must be installed in a clean, dry environment where it will not be exposed to high temperatures, moisture or excessive dust. •Do not touch the ZIPSTOR or any of its connections with wet hands. •Do not attempt to install or use the device if the power supply or eSATA Cables connected are damaged.
|
The ZipStor is a HDD (Hard Disk Drive) expander unit making it easy to add additional hard disc capacity to your Zip NVR or DVR.
The enclosure is designed to match the Zip NVR / DVR it can be situated either on top or below it for a fully integrated look.
An eSATA cable (supplied) is used to link the two devices.
Connections
1. Down power the recoder and connect the ZipStor.
Then re-apply power to the recorder and the ZipStor.
|
2. In the recorder menu go to Storage > Disk > Disk > Record on eSATA - Select Enable.  |
2. Select Apply then OK.  |
3. The connected eSATA drive or drives will then show in the list.  |
Full DVR Manual
www.systemq.com/PDF/manual/Zip-DVR-Manual.pdf
Specifications
ZIPSTOR |
|
HDD Bays |
4 |
Max HDD |
40TB (4x10TB) |
HDD Connection |
SATA |
DVR / NVR Connection |
eSATA |
Power |
12V DC |
Power Connection |
2.1mm DC Socket |
PSU |
5A Supplied |
Dimensions |
(H) 50 x (W) 378 x (D) 325.8mm |